Link Adapter AL004-(P)E
5-3
Link Adapter AL004-(P)E
Switch Settings
CTS Selector
Termination Resistance
26
Set to 0 V to have the clear-to-send (CTS) signal always ON. Set to external to
receive an external CTS signal.
When set to ON, connects the built-in termination resistance (220 ); when set
to OFF, disconnects it. Turn ON the termination resistance of the last Link Adapt-
er at each end of each Subsystem.
Section
0 V
External
line
Available
(Yes)
Not
available
(No)
Terminating resistance
selector switch
5-3