Replacing The Print Head Device (Phd) Unit; Removing The Phd Unit - Dell 2150cn User Manual

Replacing the Print Head Device (PHD) Unit

CAUTION:
the safety instructions in your Product Information Guide.
NOTICE:
If the front cover remains open for more than three minutes, print quality may
deteriorate.
NOTICE:
the belt unit. Scratches, dirt, or oil from your hands on the film of the belt unit may
reduce print quality.

Removing the PHD Unit

1 Ensure that the printer is turned off.
2 Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the
standard 250-sheet tray with both hands, and remove it from the printer.
3 Push the side button to open the front cover.
Downloaded from ManualsPrinter.com Manuals
Before performing any of the following procedures, read and follow
Protect the drums of the Print Head Device (PHD) against bright light.
Ensure nothing touches or scratches the surface (black-colored film) of
Maintaining Your Printer
377