Dell 2150cn User Manual page 204

IPsec Settings
NOTE:
If IPsec is enabled with incorrect settings, you must disable it using the
Reset IPsec menu on the operator panel.
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted
communication to the printer.
Values:
202
Dell Printer Configuration Web Tool
Downloaded from ManualsPrinter.com Manuals
Protocol Select the check box to enable the protocol.
IKE Sets IKE authentication. IKE is fixed to Pre-
Shared Key.
Pre-Shared Key Sets a shared key. Up to 255 alphanumeric
characters, periods, and hyphens can be used.
Re-enter Pre- Enters the shared key again to confirm it.
Shared Key
IKE SA Lifetime Sets the lifetime for IKE SA from 5 to 28,800
minutes.
IPsec SA Sets the lifetime for IPsec SA from 5 to 2,880
Lifetime minutes.
DH Group Sets the DH group.
PFS Select the check box to enable the PFS setting.
Remote peers Sets the IP address to connect to.
IPv4 address
Remote peers Sets the IP address to connect to.
IPv6 address
Non IPsec Allows communication with a device which
communication does not support IPsec.
policy