Xl Gear Drive Transaxle Installation - 915 Transaxle - Toro XL Series Service Manual

XL GEAR DRIVE
14. The transaxle should be free from the frame now
(Figure 15).
Figure 15
XL Gear Drive Transaxle Installation
- 915 Transaxle
1. Raise the transaxle to the frame making sure the
brake lever fits through the slot in the frame.
Reinstall the brake spring on the brake lever
(Figure 14 and Figure 16).
Figure 16
2 - 4
2. Install the right and left torque straps to the frame
and the transaxle, do not tighten. Install the 4 axle
bolts, washers, and nuts and tighten first. Then
tighten the torque straps (Figure 17).
mvc-813
3. Install the left side shift pivot clamp on the shift
pivot rod before securing the clamp to the frame.
Make sure the shift tie rod is reinstalled in the hole
in the shift pivot rod. Tighten the shift pivot clamp
and the shift tie rod (Figure 18).
mvc-814
Figure 17
Figure 18
XL Lawn Tractor Service Manual
mvc-816
mvc-817