Windows Recovery Function; Removing The Battery - Samsung SM-W700 User Manual

Appendix

Windows recovery function

If the Samsung Recovery app is not supported, reinstall Windows using the Windows
recovery function.
Reinstalling Windows will erase all apps and data on the device. Back up important
apps and data to an external storage device before reinstalling Windows.
After Windows is reinstalled, you can install the required Samsung apps. On the
taskbar, tap
1
On the taskbar, tap
2
Tap Get started.
3
Tap Keep my files or Remove everything.

Removing the battery

• T o remove the battery, you must visit an authorised service centre with the provided
instructions.
• F or your safety, you must not attempt to remove the battery. If the battery is not
properly removed, it may lead to damage to the battery and device, cause personal
injury, and/or result in the device being unsafe.
• S amsung does not accept liability for any damage or loss (whether in contract or tort,
including negligence) which may arise from failure to precisely follow these warnings and
instructions, other than death or personal injury caused by Samsung's negligence.
1
To soften the adhesive that holds the front panel to the main device, the device must be
warmed to a controlled level using a dedicated temperature controlled chamber.
Attach a suction pad removal tool to the lower end of the front panel and while holding
the device firmly, pull the front panel away from the bottom upwards.
2
Loosen and remove the screws at the location points and remove the chassis.
3
Disconnect the connectors.
4
Loosen and remove the screws from the battery and remove the battery.
→ All apps → Samsung → Samsung Update.
→ Settings → Update & security → Recovery.
58