16
ELECTRICAL SYSTEM
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary of the low beam must lie exactly on the lower mark when the
motorcycle is ready to operate with the rider mounted along with any luggage and a
402425-10
passenger if applicable.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
–
Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
–
Press the UP or DOWN button until "cLightTest" is highlighted in black on the matrix dis-
play. Pressing the SET button again starts the cornering light test.
–
Wait for a few seconds until the upper segment of the left cornering light lights up con-
tinuously.
–
Checking the left cornering light setting.
The light-dark boundary of the upper segment must run exactly through the left mark-
ing.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the cornering light range. (
–
Press the SET button.
The left cornering light is switched off.
The right cornering light test is started.
402427-01
from the wall and switch
5 m (16 ft)
p. 201)
p. 202)
200