KTM 1290 SUPER ADVENTURE Owner's Manual page 175

15 WHEELS, TIRES
–
Install the rubber dampers and rear sprocket carrier on the rear wheel.
–
Place the rear wheel in the swingarm and bring the brake disc into contact with the
brake caliper.
–
Mount wheel spindle
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
M00615-10
–
Push the wheel spindle in all the way and mount chain adjuster
Info
Mount chain adjusters
–
Make sure that the chain adjusters are fitted correctly on the adjusting screws.
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
M00631-10
–
Tighten nut
Guideline
Nut, rear wheel spindle

but do not push it in all the way.
 
and

.
M25x1.5

and nut
in the same position.
90 Nm Thread greased
(66.4 lbf ft)
173

.

.