Switch, Key (P/N 92-6785) - Toro 315-8 User Manual

Testing
1. Disconnect the switch from the wiring harness.
2. Verify that continuity exists between the terminals
listed for the switch position. Verify that there is
NO continuity between terminals not listed for the
switch (Figure 30).
-M
A
Figure 30
Position
Off
Start
Run
Demystification Glossary
B
S
+M
mvc-167x
Condition
+M + - M
B + A + S
B + A
Switch, Key
(P/N 92-6785)
Purpose
This component provides the proper switching for the
starter, ignition, accessories, and safety circuits (Figure
31).
How It Works
Detents inside the switch give it four positions: OFF,
LIGHTS (ACCESSORIES), RUN, and START. The
START position is spring loaded so the cylinder
automatically returns to RUN once the key is released.
Terminals of the ignition switch as viewed from the
terminal end (Figure 31).
Figure 31
B = Battery voltage "in"
S = Starting Circuit
I = Safety & Ignition Circuit
GLOSSARY
ignitionswitch1
R = Regulator Circuit
L = Light Circuit
3 - 21