Ricoh Pro C7100S Read This First Manual page 23

Safety Labels of This Machine
1.
Do not touch the parts which a label is put on. The inside of the machine could be very hot. Caution
should be taken when removing misfed paper.
2.
Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be
taken when removing misfed paper.
3.
Do not touch the parts a label indicates. The inside and surface of the fusing unit could be very hot.
Caution should be taken when removing misfed paper.
4.
This label indicates the weight of the unit. However, this label is meant for customer engineers and
operators who have received training. Do not lift a unit that has this label.
5.
Keep your hands clear of the parts a label indicates. Otherwise, you might trap your fingers and an
injury might occur.
Right side
1
2
DFV006
1.
This device is connecting to more than one power cord. All plugs need to disconnected to stop the
electric power supply. For the rated value refer to the rating plate.
2.
This machine uses two power cords. To stop the power supply of the machine completely, remove all
power plugs. Unless all power plugs are removed, fire or electric shock may result.
21