Samsung WF1802LS User Manual page 20

setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
The standpipe drain requires;
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240 V / 50 Hz approved electrical outlet
protected by a fuse or circuit breaker. (For more information on electrical and grounding
requirements, see page 14.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle
after the installation is complete.
20_ setting up your new washing machine
WF1802LSW-03265B-01_EN.indd Sec4:20 WF1802LSW-03265B-01_EN.indd Sec4:20
Drain hose
Hose guide
2013-02-20 2013-02-20 9:52:12 9:52:12