Signal Flow - Yamaha HTR-5240 Owner's Manual

CONNECTIONS
~
.
l~
1&:;
CD player Tape deck or
MD recorder
(U S A model)
~
Analog signal
~II...J
~ Signal flow
Be sure to connect the right channel (R), left channel (L),
input (IN) and output (OUT) properly
12
• PHONO terminals
These terminals are used to connect a turntable with an MM
or high-output MC cartridge If you have a turntable with a
low-output MC cartridge, use an inline boosting transformer
or MC head amplifier when connecting to these terminals
\ I,
~<i>~
Connecting the glOund (earth) wile of the tumtable to the GND
telminal will nOimally minimize hum, but in some cases, bettel
lesults may be obtained with the glOund wile disconnected
CONNECTIONS
~
.
l~
1&:;
CD player Tape deck or
MD recorder
(U S A model)
~
Analog signal
~II...J
~ Signal flow
Be sure to connect the right channel (R), left channel (L),
input (IN) and output (OUT) properly
12
• PHONO terminals
These terminals are used to connect a turntable with an MM
or high-output MC cartridge If you have a turntable with a
low-output MC cartridge, use an inline boosting transformer
or MC head amplifier when connecting to these terminals
\ I,
~<i>~
Connecting the glOund (earth) wile of the tumtable to the GND
telminal will nOimally minimize hum, but in some cases, bettel
lesults may be obtained with the glOund wile disconnected