Yamaha HTR-5240 Owner's Manual page 15

Hide thumbs Also See for HTR-5240:
Table of Contents

Advertisement

CONNECTIONS
AM loop antenna (included)
AM loop antenna
o
The AM loop antenna can be removed from the stand and
attached to a wall, etc However, note that the reception
sensitivity may deteriorate if the antenna is attached to a
metal or steel reinforced wall
• The AM loop antenna should be placed away ftOm this unit
• The AM loop antenna should always be connected, even if an
outdOOl AM antenna is connected to this unit
o
Press the tab and unlock the terminal hole.
fJ
Insert the AM loop antenna lead wires into the
AM ANT and GND terminals.
!J
Return the tab to its original position to lock
the lead wires. Lightly pull the lead wires to
confirm a good connection.
o
Attach the loop antenna to the antenna stand.
m
Orient the AM loop antenna so that the best
reception is obtained.
5
!J"~
Antenna stand
4
Connecting the AM loop antenna
Outdoor AM antenna
Vinyl covered wire (5 m to 10 m)
If you cannot obtain good reception with the AM loop
antenna, connect 5 m to 10 m of vinyl covered wire to the
AM ANT terminal and extend it outdoors flOm a window
I
--
--
--
--.
-----
-
-.'
Ground (GND terminal)
r':
~---------~
FOI
maximum safety and minimum interfelence, connect
the antenna GND terminal to a good earth ground A good
ealth glOund is a metal stake driven into moist eatth
I
11
CONNECTIONS
AM loop antenna (included)
AM loop antenna
o
The AM loop antenna can be removed from the stand and
attached to a wall, etc However, note that the reception
sensitivity may deteriorate if the antenna is attached to a
metal or steel reinforced wall
• The AM loop antenna should be placed away ftOm this unit
• The AM loop antenna should always be connected, even if an
outdOOl AM antenna is connected to this unit
o
Press the tab and unlock the terminal hole.
fJ
Insert the AM loop antenna lead wires into the
AM ANT and GND terminals.
!J
Return the tab to its original position to lock
the lead wires. Lightly pull the lead wires to
confirm a good connection.
o
Attach the loop antenna to the antenna stand.
m
Orient the AM loop antenna so that the best
reception is obtained.
5
!J"~
Antenna stand
4
Connecting the AM loop antenna
Outdoor AM antenna
Vinyl covered wire (5 m to 10 m)
If you cannot obtain good reception with the AM loop
antenna, connect 5 m to 10 m of vinyl covered wire to the
AM ANT terminal and extend it outdoors flOm a window
I
--
--
--
--.
-----
-
-.'
Ground (GND terminal)
r':
~---------~
FOI
maximum safety and minimum interfelence, connect
the antenna GND terminal to a good earth ground A good
ealth glOund is a metal stake driven into moist eatth
I
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents