Table of Contents
Advertisement
19
STORAGE
19.2
Preparing for use after storage
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
–
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and exhaust system to rust.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Recharge the battery.
–
Install the battery.
–
Set the clock. (
–
Refuel. (
–
Perform checks and vehicle care when preparing for use. (
–
Take a test ride.
401059-01
x
(
p. 107)
x
(
p. 106)
p. 37)
p. 61)
p. 70)
p. 71)
p. 72)
p. 70)
p. 51)
144
Advertisement
Table of Contents
