13
WHEELS, TIRES
–
Insert wheel speed sensor
Guideline
Remaining screws, chassis
–
Position the brake caliper and check that the brake linings are seated correctly.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
tion.
602545-11
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
602546-11
into the hole. Mount and tighten screw
3
. Mount screws
but do not tighten yet.
5
6
.
6
M10x1.25
.
7
.
4
M6
10 Nm (7.4 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
p. 72)
p. 70)
M8
15 Nm
(11.1 lbf ft)
96
®
243™