KTM 250 EXC-F Owner's Manual page 59

12 SERVICE WORK ON THE CHASSIS
–
Mount and tighten screw
Guideline
Screw, top steering stem
S00638-10
(EXC‑F Six Days)
–
Position the fork legs.
Position bleeder screws
B01598-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
M00139-10
–
Tighten screw
Guideline
Screw, top steering head
B01232-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
B01233-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Secure the wiring harness with cable holder
M00139-11

.
M8

toward the front.
Info
The rebound damping is located in the right fork leg REB (red adjusting
screw). The compression damping is located in the left fork leg COMP
(white adjusting screw).
Grooves are milled into the side of the upper end of the fork legs. The
second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.

.

.

.
M8

.
17 Nm Loctite
(12.5 lbf ft)
M8 15 Nm
(11.1 lbf ft)
M20x1.5 12 Nm
(8.9 lbf ft)
17 Nm Loctite
(12.5 lbf ft)
M8 17 Nm
(12.5 lbf ft)

.
57
® 243™
® 243™