Plug & Auto Setup - Samsung DVD-HR733 Instruction Manual

Plug & Auto Setup
Your HDD & DVD RECORDER will automatically set itself up
when it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few minutes.
Your HDD & DVD RECORDER will then be ready for use.
1 Connect the RF cable as indicated on page 19.
(Connecting Your HDD & DVD RECORDER to the
TV Using the RF Cable and scart cable.)
(HR738 Only)
To use HDMI cable, make the Audio/Video
connection before plugging in the power cord or
after finishing the "Plug & Auto Setup."
Do not connect the HDMI cable while the
"Plug & Auto Setup" is progressing.
2 Plug the HDD & DVD RECORDER into the mains.
"AUTO" in the front panel display flickers.
3 Press a number button to select the language.
4 Press the OK button to start the auto setup.
Auto setup will be started.
Yes No
Select "Country" using the ...† œ √ buttons to
5
select your country.
Country Selection
A NL
B I
DK N
FIN P
D E
• Refer to following abbreviation table when selecting "Country".
A(Austria) NL(Netherlands) S(Sweden)
B(Belgium) I(Italy)
DK(Denmark) N(Norway)
FIN(Finland) P(Portugal)
D(Deutschland) E(Spain)
• The HDD & DVD RECORDER searches for the stations
according to a preset preference list corresponding to the country
that you have selected.
6 Auto channel scan will be started.
Auto Setup
Please wait.
•
The number of stations automatically stored by the
HDD & DVD RECORDER depends on the number of
stations that it has found.
After auto channel scan is completed, auto clock
7
setting will be started automatically in 10 seconds.
If you want to start auto clock setting immediately,
press OK button. If you do not want to do auto
clock setting, press CANCEL or MENU button.
Auto channel scan completed successfully.
Press the [OK] button to auto clock set.
Yes
S PL
CH CZ
TR Others
GR
HU
PL(Poland)
CH(Swiss) CZ (Czech)
TR(Turkey) Others
GR(Greece)
HU(Hungary)
68%
No
English - 29