Plug And Play - Samsung SyncMaster 2033HD Quick Setup Manual

Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
Preset
: Connecting the mains and antenna.
N
1. Press the POWER button on the remote control.
You can also use the
N
The message
N
2. Press the ENTERE button. Select the appropriate language by
pressing the ▲ or ▼ button. Press the ENTERE button to confirm
your choice.
3. Press the ◄ or ► button to select Store Demo or Home Use, then
the ENTERE button.
We recommend setting the TV to
N
picture in your home environment.
Store Demo mode is only intended for use in retail
N
environments.
If the unit is accidentally set to
N
want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press
and hold the MENU button on the TV for 5 seconds.
4. Press the ENTERE button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE
button to confirm your choice.
5. Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button.
• Air : Air antenna signal.
• Cable : Cable antenna signal.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select Start.
When setting the antenna source to
N
search.
Digital & Analogue
N
Digital: Digital channels.
Analogue: Analogue channels.
The channel search will start and end automatically.
N
Press the ENTERE button at any time to interrupt the memorization process.
N
After all the available channels are stored, the message
N
7. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
If you select Manual, Set current date and time is displayed.
N
If you have received a digital signal, the time will be set automatically. If not, select
N
8. The description for the connection method providing the best HD screen quality is displayed. Check the description
and press the ENTERE button.
9. The message Enjoy your TV. is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
❑
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE
button.
2. Press the ENTERE button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is '0-0-0-0'.
If you want to change PIN number, use the
N
The Plug & Play feature is only available in the TV mode.
N
POWERP button on the TV.
You can set the menu Language. is displayed.
Home Use mode for the best
Store Demo mode and you
Cable, a step appears allowing you to set a value for the digital channel
: Digital and Analogue channels.
Set the Clock Mode. is displayed.
Change PIN function.
English-3
Manual to set the clock.