Fujitsu S1100 Operator's Manual page 179

5.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
Load another document in the ScanSnap when you want to scan multiple sheets. Scanning
starts automatically when a document is loaded.
6.
Press the [Scan/Stop] button on the ScanSnap to finish scanning.
If [PDF(*.pdf)] is selected for [File format] in the [File option] tab of the ScanSnap
setup dialog box, a separate JPEG file will be created from each page of the PDF
file.
The following dialog box is displayed when the JPEG file is being created.
Evernote for Windows starts up, and the JPEG file is saved to Evernote.
When you select [PDF (*.pdf)] for [File format] in the [File option] tab of the ScanSnap
setup dialog box, a four-digit serial number is automatically added to the name of the
file which is saved to Evernote.
e.g. When the file name is [ScanSnap], the file is saved as:
The file in which the scanned image is saved remains in the folder specified for [Image
saving folder] in the [Save] tab of the ScanSnap setup dialog box even after the
scanned image is saved to Evernote. Delete this file if unnecessary.
ScanSnap_0001, ScanSnap_0002, ScanSnap_0003...
179
Actions (for Windows users)