Pre-Start; Operating Instructions - Exmark COMMERCIAL 21 Operator's Manual

Pre-Start

Fill fuel tanks. See Fuel Recommendations in
the Specifications section for additional gasoline
information.
Do Not add oil to gasoline.
Do Not overfill fuel tank. Fill the fuel tank to the
bottom of the filler neck. The empty space in the
tank allows gasoline to expand. Overfilling may result
in fuel leakage or damage to the engine or emission
system.
Make sure you understand the controls, their
locations, their functions, and their safety
requirements.
Refer to the Maintenance section and perform all the
necessary inspection and maintenance steps.

Operating Instructions

Handle Adjustment
The height of the handle can be adjusted for
comfortable operation. Stand behind the handle to
determine the height. To adjust the handle height,
position the hardware into one of the three holes in
the handle bracket.
Open the Fuel Shut-Off Valve
Rotate the valve 1/4 turn counterclockwise to turn
the fuel on (if equipped).
Starting the Engine
1. Connect the wire to the spark plug.
1. Muffler
2. Oil fill/dipstick
3. Fuel tank cap
4. Recoil starter handle (located on handle bar)
5. Air filter
6. Spark plug
Kawasaki units with large fuel tank shown
1. Muffler
2. Oil fill/dipstick
3. Recoil starter handle
4. Fuel tank cap
5. Throttle-choke-engine stop control (BBC only)
6. Oil filter
7. Air cleaner
8. Primer bulb (if equipped)
9. Spark plug
2. Open the fuel valve.
15
Operation
Figure 8
Honda unit
Figure 9