Product Overview; Operation; Controls - Exmark COMMERCIAL 21 Operator's Manual

Product Overview

Figure 3
1. Grass bag
2. Handle
3. Drive Bail
(Self-Propelled Units
Only)
4. Blade Control Bail
5. Discharge door
6. Rear wheel height
adjustment
7. Front wheel height
adjuster

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Blade Control Bail
Located on the upper handle as shown in Figure 4.
When the blade control bail is depressed, the system
senses that the operator is in the normal operator's
position.
• For Units with a Blade Brake Clutch: When
the blade control bail is released, the system
senses that the operator has moved from the
normal operating position and will stop the blade.
• For Units without a Blade Brake Clutch:
When the blade control bail is released, the system
senses that the operator has moved from the
normal operating position and will kill the engine.
Blade Brake Unit Shown
1. Blade control lock lever (Blade Brake Units Only)
2. Blade control bail
3. Handle
4. Drive bail (Self-Propelled Units Only)
Self-Propel Drive Bail (Self-Propelled
Units Only)
Located on the upper handle as shown in Figure 4.
When the self-propel drive bail is squeezed against
the handle, the unit ground speed will change based
13
Operation
Figure 4