Power Connector Cable - Compaq Presario CQ45 Maintenance And Service Manual

Power connector cable

Description
Power connector cable (includes power connector)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speaker assembly (see
f. Display assembly (see
g. Top cover (see
Remove the power connector cable:
1. Turn the computer upright with the right side toward you.
2. Disconnect the power connector cable (1) from the system board.
3. Remove the power connector (2) from the clip built into the base enclosure.
80 Chapter 4 Removal and replacement procedures
Battery on page 43).
Hard drive on page 46)
Optical drive on page
Keyboard on page 56)
Switch cover on page
Speaker assembly on page
Display assembly on page
Top cover on page 69)
44)
58)
60)
62)
Spare part number
486864-001