Optical Drive - Compaq Presario CQ45 Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
For use in computer models with Intel processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Bezel for DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe (includes
mounting hardware)
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
Bezel for DVD±RW and CD-RW Super Multi Double-Layer Combo Drive (includes mounting
hardware)
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
Bezel for Blu-ray ROM DVD±R/RW SuperMulti DL Drive (includes mounting hardware)
For use in computer models with AMD processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is
partially ejected from the optical drive.)
44 Chapter 4 Removal and replacement procedures
Battery on page 43).
Spare part number
482178-001
488212-001
482176-001
488211-001
482182-001
488213-001
482178-002
482176-002
482182-002