Level 3 Repair
8-3-18. OTG
OTG does not work
Check the TR700
(TP_USB_OTG_EN > 0V)
Check the TR700
(OTG_ID < 0V)
Check the U704
(C700 > 5.0V)
Replace UCP400
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
Yes
Yes
Yes
Yes
END
No
Check the HDC700 is well connected
No
Re-solder and Replace the TR700
No
Check the R701, R703, R710, R711 is well
8-48
mounted