Samsung GT-P6800 Servise Manual page 29

place the earphone connector bracket on LCD
5
Bracket after placing the earphone connector
as push to downside. And then screw the 2
screws.
1) Be careful not to make scratch and molding damage!
7
Attach the tapes in order of the below pictures.
1) Be careful not to make scratch and molding damage!
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
6
place the Volume key FPCB on the LCD
Bracket follow the picture after removing
release paper of Volume Key FPCB. and
then assemble the Volume key FPCB
conncetor.
1) Be careful not to make scratch and molding damage!
8
Assemble the connectors(SUB PBA and OCTA
LCD) after placing the main PBA on LCD
Bracket.
1) Be careful not to make scratch and molding damage!
7-5
7. Level 2 Repair