7. Level 2 Repair
7-2. Assembly
1
Place WIFI INTENNA and 3Mega CAMERA on
OCTA
LCD Bracket Assembly.
1) Be careful not to make scratch and molding damage!
3
place the Camera Rubber after placing the
Sensor Rubber along the direction of the
below picture.
1) Be careful not to make scratch and molding damage!
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Place the SUB PBA on the Bracket after
2
removing release paper and then assemble
the connector of 3Mega CAMERA.
1) Be careful not to make scratch and molding damage!
4
Place the 2 Mega CAMERA and then
assemble the Camera connector.
1) Be careful not to make scratch and molding damage!
7-4