Data Application Overview - Raymarine a65 Operation Instructions Manual

17.1 Data application overview

The Data application enables you to view data
generated by the multifunction display or data that is
available on your system.
Data can be obtained from devices connected using
SeaTalk hs , SeaTalk ng or NMEA protocols.
Pre-configured datapages
The default datapage configuration is dependant
upon the boat type selected during the initial set-up
wizard.
Each datapage consists of a number of 'cells', that
display the information.
Default datapage configuration is shown below:
Motor vessel
Page Page
number
Engine
1/6
Navigation
2/6
3/6 Environment
4/6 Fishing
5/6 Fuel
6/6 Rolling road
Note: Datapage selection is a local setting, and
therefore only affects the individual display that
you are currently using. It does not affect any
networked displays.
256
Sailing vessel
Page Page
number
Engine
1/5
Navigation
2/5
3/5 Sailing
4/5 Environment
5/5 Rolling road
Selecting datapages using touch
You can scroll through all available pages using the
touchscreen.
From the Data application:
1. Touch the screen.
2. Slide your finger up and let go of the screen to
go to the next datapage.
3. Slide your finger down and let go of the screen to
go to the previous datapage.
Selecting datapages
To select datapages using a non-touch multifunction
display follow the steps below.
From the data application:
1. Move the Joystick Down to goto the next page,
or
2. Move the Joystick Up to goto the previous page.
Data application features
The following features are available in the Data
application.
Change the order datapages
appear
Customize datapage content
Add new custom datapages
Rename the datapages
Delete datapages
D12878-1
• Changing the order of
datapages
• Customizing
datapage content using
touch
• Customizing datapage
content
• Adding a new datapage
• Renaming a datapage
• Deleting a datapage
LightHouse MFD operation instructions