Waypoints In The Fishfinder Application - Raymarine a65 Operation Instructions Manual

Note: The VRM is only available in Bottom Lock
mode when viewing the display mode in Split
screen.
212
15.17 Waypoints in the Fishfinder
application
Placing a waypoint in the Fishfinder application
enables you to mark a position so that you can return
to it later.
When a waypoint is placed its details are added
to the waypoint list and a vertical line showing
the waypoint symbol is displayed on-screen. The
waypoints can then be navigated from the Chart
application.
Placing a Waypoint in the fishfinder
application
From the fishfinder application:
1. Select and hold the required location.
The fishfinder context menu is displayed.
2. Select Place Waypoint.
Placing a waypoint using the WPT button or
icon
From the fishfinder application:
1. Select WPT.
The waypoint menu is displayed.
2. Whilst the waypoint menu is open:
• Select WPT again to place a waypoint at your
vessels position, or
• Select the appropriate option: Place Waypoint
At Vessel, Place Waypoint At Cursor or Place
Waypoint At Lat/lon.
Placing a Waypoint using the context menu
You can place a waypoint in the fishfinder application
using the context menu.
From the Fishfinder context menu:
1. Select Place Waypoint.
The Waypoint is placed at the cursors location.
and the new waypoint dialog is displayed.
2. Select Ok to accept the default waypoint details,
or
3. Select a field to edit the new waypoint's details.
LightHouse MFD operation instructions