Chart Ranging And Panning - Raymarine a65 Operation Instructions Manual

– Fix — Satellite fix has been acquired.
– No Fix — No satellite fix can be acquired.
– D Fix — A differential beacon fix has been
acquired.
– SD Fix — A differential satellite fix has been
acquired.
• Position — Displays the latitude and longitude
position of your receiver.
• Date / Time — Displays the current date and time
generated by the position fix in UTC format .
• Mode — Identifies wether the receiver is working
in differential mode or non-differential mode.
• Datum — The receiver's datum setting affects
the accuracy of the vessel position information
displayed in the Chart application. In order for your
receiver and MFD to correlate accurately with your
paper charts, they must be using the same datum.
Chart application

14.5 Chart ranging and panning

Ranging in and out
The table below shows the Range controls available
for each display variant.
Rotary Control
Rotary Control
Range in and
Range out buttons
Range in and
Range out
onscreen icons
Multi-Touch
gesture — Pinch
to Zoom
Panning the chart
You can pan the chart area on a touchscreen
multifunction display by following the steps below.
In the chart application:
1. Swipe your finger across the screen from right
to left to pan right.
2. Swipe your finger across the screen from left to
right to pan left.
3. Swipe your finger across the screen from top to
bottom to pan up.
4. Swipe your finger across the screen from bottom
to top to pan down.
Panning the chart
You can pan the chart area on a non-touchscreen
multifunction display by following the steps below.
From the chart application:
1. Move the Joystick in the direction you want to
pan.
• eS Series
• c Series
• e Series
• RMK-9 keypad
• c Series
• e Series
(excluding e7
and e7D
• RMK-9 keypad
• a Series
• e Series
• gS Series
• eS Series
• a Series
• gS Series
• eS Series
161