Useful Information; Character Entry - Panasonic KX-TG7511CX Operating Instructions Manual

Table of Contents

TG7511CX(e).book Page 35 Wednesday, March 24, 2010 8:41 AM

The dial keys are used to enter characters and numbers. Each dial key has multiple

characters assigned to it. The characters that can be entered depend on the

character entry mode (page 35).

– Press {<} or {>} to move the cursor left or right.

– Press dial keys to enter characters and numbers.

– Press ^ to erase the character or number highlighted by the cursor. Press and

hold ^ to erase all characters or numbers.

– Press {*} (A→a) to switch between uppercase and lowercase.

– To enter another character located on the same dial key, press {>} to move the

cursor to the next space, then press the appropriate dial key.

– If you do not press any dial key within 5 seconds after entering a character, the

character is fixed and the cursor moves to the next space.

Character entry modes

The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek

(F), Extended 1 (G), Extended 2 (H), and Cyrillic (I). When in these entry

modes except Numeric, you can select which character is entered by pressing a dial

key repeatedly.

When the unit displays the character entry screen:

/ i {V}/{^}: Select a character entry mode. i M

Note:

in the following tables represents a single space.

Alphabet character table (ABC)

Numeric entry table (0-9)

Greek character table (M)

Useful Information

Table of Contents