Table of Contents
Advertisement
TG7511CX(e).book Page 41 Wednesday, March 24, 2010 8:41 AM
Problem
Cause/solution
Caller information is
L Depending on your service provider/telephone
slow to display.
L Move closer to the base unit.
Time on the unit has
L Incorrect time information from incoming Caller ID
shifted.
The name stored in the
L Edit the phonebook entry name to fit in 1 line of text
phonebook is not fully
displayed while an
outside call is being
received.
Liquid damage
Problem
Cause/solution
Liquid or other form of
L Disconnect the AC adaptor and telephone line cord
moisture has entered
the handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
company, the unit may display the caller's information
at the 2nd ring or later.
changes the time. Set the time adjustment to
"Manual" (off) (page 23).
(page 19).
from the base unit. Remove the batteries from the
handset and leave to dry for at least 3 days. After the
handset/base unit are completely dry, reconnect the
AC adaptor and telephone line cord. Insert the
batteries and charge fully before use. If the unit does
not work properly, contact an authorised service
centre.
Useful Information
41
Advertisement
Table of Contents
