Table of Contents
Advertisement
503,4 for 504, or 5 for 505.
1
X 1 for 501, 2 for 502, 3 for
tistokesl of your liquid. The maximum is 25CK.
cen-
("CK) in part number with the viscosity (in
*
Replace
NOTE
FTB50_X-t*CK)-5KP
PSIG
FTB5O_X-(*CK)-115VAC
5000
115VAC
signal conditioner power supply
FTB50_X-t"CKb5VDC
FTB50_X-(*CK)-P
0-5VDC
output
TTL Pulse output
FTB505-("CK)
' CK)
FTB504-(
"CK)
FTB503-(
"CK)
FTB502-(
"CK)
FTB501-(
(Adalet XJS DO) rated for class I, groups C and D, and class
II, groups E, F and G.
Features of the FTB500 include:
1. Integral signal conditioner which provides K-factor offset correction for
the mini-flowmeters.
2. Versatile AC and DC power versions are available.
3. Configurable pulse voltage or analog output options.
1.2
AVAILABLE MODELS
DESCRIPTION
(LINEAR FLOW RANGE)
STANDARD PART NUMBERS
0.02
to
0.15 GPM
0.025 to 0.25 GPM
0.05
to
0.5 GPM
0.1
to
1.0 GPM
0.2
to
2.0 GPM
OPTIONAL PART NUMBERS
PART NUMBER*
pelton wheel-like
rotor whose motion is converted into a pulse output proportional to flow
by a pickup coil. They come with an integral signal conditioner, powered
by either 15-35 VDC or 115 VAC (optional) to provide amplified frequency
and analog output. The signal conditioner corrects for the inherent zero off-
set of the flowmeter pulse output. It is mounted in a NEMA 4X, explosion
proof enclosure
OMEGA@ FTB500 Series Low Flowmeters offer extremely accurate
low flow measurement of liquids and gases. They utilize a
SECTION 1 INTRODUCTION
1.1
DESCRIPTION
The
Advertisement
Table of Contents
