Download Print this page
Omega FTB-4000 Series Operator's Manual

Omega FTB-4000 Series Operator's Manual

Turbine meters for water

Advertisement

Quick Links

FTB-4000 and FTB-5000 Series
Turbine Meters for Water
Operator's Manual:
INSTRU TION
SHEET
Shop online at omega.com e-mail: info@omega.com
For latest product manuals: www.omegamanual.info
General Description
Specifically designed for water billing applications, Omega
and feature tamper-resistant, non-resettable totalizers. The large faces are easy to read and are fully
rotatable for simplified mounting. FTB-4605 and FTB-4607 have no local indication of the flow rate or total.
Optional reed relay scaled pulse outputs allow for remote totalization (6 feet of cable included). For the FTB-4000 Series, the
pulse output is factory installed and must be requested at the time of order.
The FTB-5000 Series units feature field installation of the reed relay or optical pickup pulse outputs. The optical pickup is used
for use with flow rate frequency meters to provide remote rate indication (user DC power input required). FTB-5000 units are
supplied standard with one reed relay for remote totalization; a second relay is optional.
All FTB flow meters feature built-in strainers and are shipped complete with locking nuts, gaskets and coupling pieces.
The units have a built-in flow finder which registers even a small trickle of water passing through the meter.
THESE WATER FLOW METERS HAVE PLASTIC INTERNAL PARTS THAT ARE RAPIDLY ATTACKED BY
HYDROCARBON FLUIDS, SUCH AS GASOLINE, DIESEL FUEL, KEROSENE, AND SIMILAR MATERIALS. EVEN TRACE
AMOUNTS OF THESE MATERIALS IN WATER WILL TEND TO ACCUMULATE IN THE PLASTIC PARTS LEADING TO
COMPLETE FAILURE OF THE FLOW METER. NOTE: WATER AND ETHYLENE GLYCOL MIXTURES TYPICALLY PRESENT NO
PROBLEM WHEN USED WITH THESE WATER FLOWMETERS.
UNP CKING
Remove the packing list and verify that all equipment has been received. If there are any questions about the shipment, please
call the Omega Customer Service Department.
Upon receipt of shipment, inspect the container and equipment for any signs of damage. Take particular note of any evidence
of rough handling in transit. Immediately report any damage to the shipping agent.
The carrier will not honor any claims unless all shipping material is saved for their examination. After
examining and removing contents, save packing material and carton in the event reshipment is necessary.
MOUNTING
The FTB-4000 Series (only all 1/2" and 3/4") can be mounted either horizontally or vertically.
All FTB-4000 Series 1", 1 1/4", 1 1/2" and 2" horizontal only.
FTB-5000X - FTB-5020 horizontal only.
FTB-5020X to FTB-5080 all can be mounted either horizontally or vertically.
M0504/0918
FTB-4000 and FTB-5000 Series Flow meters are highly accurate
W RNING
NOTE

Advertisement

loading

Summary of Contents for Omega FTB-4000 Series

  • Page 1 FTB-4605 and FTB-4607 have no local indication of the flow rate or total. Optional reed relay scaled pulse outputs allow for remote totalization (6 feet of cable included). For the FTB-4000 Series, the pulse output is factory installed and must be requested at the time of order.
  • Page 3 SPECIFIC TIONS (CONT’D) CCUR CY: 4600 Series: From 10% of cont. to max. flow: ± 1.5% of reading Below 10% of cont. flow: ± 2% of reading 4000, 5000 Series: From 20% of cont. to max. flow: ± 1% of reading Below 20% of cont.
  • Page 4 WIRING DI GR M (FTB4605/FTB4607 ONLY) NOTE The wiring scheme illustrated below may be of two versions Follow the appropriate wiring scheme. LEAD COLOR SCHEME 6-16VDC WHITE PULSE SIGNAL HI GREEN POWER GROUND BROWN PULSE LO...
  • Page 5 Fax: (203) 359-7700 e-mail: info@omega.com For Other Locations Visit omega.com/worldwide The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice. WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC.

This manual is also suitable for:

Ftb-5000 seriesFtb-4005Ftb-4007Ftb-4105Ftb-4105p+Ftb-4107 ... Show all