Customer Service - Bosch KGV series Instructions For Use Manual

f
' J _
;::
,-
·---···-
··----~-----·---·--·----··-
-----
--
- __
.,
___
~-------
Fault
Possible cause Remedial action
The temperature in the Temperature has been set too low.
Increase the temperature.
refrigerator
If large quantities of fresh food are Do not exceed max. freezing
compartment is too
cold.
being frozen, the temperature in the capacity.
refrigerator compartment drops
temporarily, ·as the refrigerating unit
runs for a long time.
"super" display flashes;
When the appliance is switched on.
When the set temperature has been
Temperature in the
reached, the "super" display stops
refrigerator
flashing.
compartment is too
The display may flash without any
high.
risk to the frozen food:
• if the appliance door is opened
frequently.
• Large quantities of food have
been placed in the freezer
compartment.
The refrigerating unit
. Large quantities of fresh food are Do not exceed max. freezing
is switching on more
being frozen. capacity.
frequently and for
The ventilation openings have been Remove obstacles.
longer.
covered.
Refrigerator has no
On/Off button has not been Press the On/Off button.
cooling capacity.
switched on.
Power failure; the fuse has been
Check whether the power is on,
switched off; the mains plug has not check the fuses.
been inserted properly.
The interior light glows Ambient temperature is below 20 OC The interior light goes out again at
at a reduced luminosity
or fast freeze has been switched on. ambient temperatures above 20 OC
when the door is almost
Not a fault!
or after fast freeze has been
closed (or light switch switched off.
depressed).
Customer service
(E-number) and production number
(FD-number) of your appliance.
. ·Please check your telephone book or the
customer-service list for your nearest
customer-service facility. When
contacting customer service, please
· ALWAYS quote the product number
These numbers can be found on the
rating plate.
Fig.
1m
To prevent unncessary call-outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
27