Cadillac 2016 CTS Manual page 208

The indicator light for both systems
is in the instrument cluster. This
light will:
Flash when TCS is limiting
wheel spin.
Flash when StabiliTrak is
activated.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC),
and comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. if comes on
and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.
Turning the Systems Off
and On
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
Driving and Operating
To turn off only TCS, press and
release the button. The traction
off light displays in the instrument
cluster. The appropriate DIC
message is displayed. See Ride
Control System Messages 0 142.
To turn TCS on again, press and
release the button. The traction
off light displayed in the
instrument cluster will turn off.
If TCS is limiting wheel spin when
the button is pressed, the
system will not turn off until the
wheels stop spinning.
To turn off both TCS and StabiliTrak,
press and hold the
the traction off light
StabiliTrak OFF light
and stay on in the instrument
cluster. The appropriate DIC
message is displayed. See Ride
Control System Messages 0 142.
207
button until
and
come on