Connecting To Your Pc - Olympus DS-2 Instructions Manual

Connecting to Your PC

Be sure to finish installing DSS Player before connecting the recorder.
Connecting to your PC using the USB
cable
1 Release the HOLD switch.
2
Connect the USB connection
cable to the USB port or the
USB hub of the PC.
3
Confirm that the recorder has
stopped, and connect the USB
cable to the connection port
on the bottom of the recorder.
Please connect the USB connection
cable mark to match the
of the recorder connection port.
"STORAGE REMOTE" is displayed
on recorder if the USB cable is
connected.
Windows
When the recorder is connected and "My Computer" is
opened, a removable disk drive is displayed. If "Add New
Hardware Wizard" appears, cancel the wizard by pressing
the [Cancel] button and then install DSS Player.
Macintosh
If the recorder is connected to Mac OS, an icon with a drive
name of "Untitled" appears.
mark
6
47