Olympus DS-2 Instructions Manual page 27

Last File End
When the following operation is executed and it reaches to the end of the
last file during playback, "END" will be displayed and flashing for 5 seconds
in the display.
• Press the FF button (skip)
• Press the FF button continuously (CUE)
• Playback last file
Operating the FF or REW button while "END" is displayed and flashing, the following operation
can be executed.
Press the REW button continuously.
➥ Continuously rewind (REVIEW) from the last file end ( P.25).
Set other than file skip in the skip interval or, press the REW button when the previous playback is set to
ON.
➥ The nearest of the set time interval or index mark, or only the return time of the previous playback,
will start the playback in reverse skip.
Set the file skip in the skip interval or, press the REW button when the previous playback is set to OFF.
➥ The playback will start in reverse skip; either at the nearest last file start position or the index mark.
Press the FF button.
➥ Skips to the starting position of the head file, and stops.
Press the FF button continuously.
➥ It skips continuously from the starting position of the head file, and it will stop if the FF button is
released.
Note
After "END" is displayed for 5 seconds and flashing, it returns to the start position of the last file and stop.
Operation
4
27