Training Your Pc For Voice Recognition - Olympus DS DS-3000 Online Instructions Manual

Training your PC for Voice Recognition

When you use voice-recognition software such as IBM ViaVoice, it is recommended that you set
the recorder to PC microphone and have the software learn the characteristics of the speaker's
voice and the recorder's built-in microphone to maximize the accuracy of voice recognition.
Earphone jack
P L A Y
S T O P
E R A S E
PC
To the PC's
microphone jack
1
Connect the KP-4 PC connection cable
(supplied) to the recorder's earphone jack and
the PC microphone jack of your PC.
2
Start the software on your PC and prepare it to
receive voice input. (Refer to the User's manual
of the software for details.)
3
Press and hold the NEW button to
get into PC train mode.
The Record/Play indicator lamp lights in
red, and "TRAIN PC" flashes on the
display, while you are holding the NEW
button pressed.
4
Speak into the recorder's microphone.
································································································
Notes
• When the recorder is connected to a PC with USB connection, you
cannot perform these procedures.
• While the recorder is set as PC microphone, the output level of the
earphone jack is fixed.
• Refer to the user's manuals of DSS Player Pro and your voice
recognition software for details.
49