Using The Remote Browser Method - HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual

To connect the storage system to a network using the direct attach method
1.
Log on to the HP All-in-One Storage System with the default user name administrator and
the password hpinvent.
The HP All-in-One Storage System Management Console and Rapid Startup Wizard start
automatically.
NOTE:
You can change the administrator name and password when you configure the server using
the Rapid Startup Wizard. See
2.
To complete network configuration using the Rapid Startup Wizard, see
"Configuring the server on the

Using the remote browser method

The storage system ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the serial number of the device is known, the server can be accessed
through a client running Internet Explorer 5.5 (or later) on that network using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the storage
system
• DHCP-enabled network
• Serial number or IP address of the storage system
To connect the server to a network using the remote browser method, you must first ensure that the
client is configured to download signed ActiveX controls.
To enable ActiveX controls
24 Installing and configuring the server
"Running the Rapid Startup
network" on page 30.
Wizard" on page 32.