HP StorageWorks NAS 1500s Installation Manual page 30

Figure 6: RapidLaunch device discovery screen
9. Select the unconfigured HP StorageWorks NAS 1500s device
from the device list. If more than one displays, check the
serial number in the System Name column by clicking the
appropriate cell.
Note:
as a 1200s.
10. Login to the WebUI. This launches the WebUI configuration
application (Rapid Startup) on the target HP StorageWorks
NAS device, as shown in
Note:
password is hpinvent. The WebUI uses the same login as the local
administrator's account or an account with administrative privileges.
11. Go to
complete the setup procedures.
30
Version 2.7.134 of the RapidLaunch utility displays the 1500s
The default login for the WebUI is administrator and the
"Rapid Startup Wizard
Figure 8.
configuration" on page 34 to
NAS 1500s Installation Guide