Changing The Time And Date - Olympus WS-500M Detailed Instructions

• The clock will start from the set date
and time. Press the OK ` button
according to the time signal.
1
Note
• If you press the OK ` button during the
setup operation, the recorder will save the
items that were set to that point.

Changing the time and date

While the recorder is during stop mode,
press and hold the STOP 4 button to display
the [Time & Date], and [Remain]. If the
current time and date is not correct, set it
using the procedure below.
1
While the recorder is during stop
mode, press the MENU button.
• The menu will appear on the display
(☞ P.36).
16
Setting time and date [Time & Date]
+−
button
9 button
OK `button
MENU button
2
Press the + or − button to select
[Device Menu] tab.
• You can change the menu display by
moving the settings tab cursor.
3 Press the OK ` or 9 button to
move the cursor to the item to
set.
• [Device Menu] will appear on the
display.
4 Press the OK ` or 9 button.
• [Time & Date] will appear on the
display.
• The "hour" will flash on the display,
indicating the start of the Time and
Date setup process.
The following steps are the same as Step 1
through Step 3 of "Setting time and date
[Time & Date]" (☞ P.15).
5
Press the MENU button to close
the menu screen.