Olympus WS-500M Detailed Instructions page 67

Symptom
Unable to erase
Noise is audible
through the recording
monitor
Unable to set index
marks, tempmarks
Probable cause
The file is locked.
The file is read-only.
Acoustic feedback is occurring.
The maximum number of marks has
been reached.
The file is locked.
The file is read-only.
Troubleshooting
Action
Unlock the file (☞ P.36, P.38).
Unlock the file or cancel the read-only
setting of the file on the PC.
When the built-in speaker amps and
the like are connected there is a risk
that audio feedback will occur while
recording. It is recommended that
you use earphones for the recording
monitor.
Conduct adjustments like separating
the earphones from the microphone
further, do not point the microphone
at the earphones, lower the volume on
the recording monitor, and so on.
Erase unnecessary marks (☞ P.31).
Unlock the file (☞ P.36, P.38).
Unlock the file or cancel the read-only
setting of the file on the PC.
6
67