RM-180
Service Software Instructions
Phoenix installation steps in brief
Prerequisites
Recommended hardware requirements:
• Computer processor: Pentium 700 MHz or higher
• RAM 256 MB
• Disk space 100-300 MB
Supported operating systems:
Windows 2000 Service Pack 3 or higher
•
Windows XP Service Pack 1 or higher
•
Context
Phoenix is a service software for reprogramming, testing and tuning phones.
Phoenix installation contains:
• Service software support for all phone models included in the package
• Flash update package files for programming devices
• All needed drivers for:
• PKD-1 (DK2) dongle
• DKU-2 USB cable
Note:
Separate installation packages for flash update files and drivers are also available, but it is
not necessary to use them unless there are updates between
separate update packages are used, they should be used after
installed.
The phone model specific data package includes all changing product specific data:
• Product software binary files
• Files for type label printing
• Validation file for the faultlog repair data reporting system
• All product specific configuration files for
Phoenix and phone data packages should only be used as complete installation packages.
Note:
Uninstallation should be made from the
Phoenix , you need to:
To use
Steps
1. Connect a PKD-1 (DK2) dongle to the computer parallel port.
Phoenix .
2. Install
3. Install the phone-specific data package.
4. Configure users.
5. Manage connection settings (depends on the tools you are using).
If you use FPS-8:
Issue 1
Phoenix software components
Windows Control Panel.
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Phoenix service software releases. If
Phoenix and data packages have been
• Update FPS-8 software
• Activate FPS-8
Nokia Customer Care
Page 3 –5