Nokia N72 Service Manual page 193

RM-180
RF Troubleshooting and Tuning Guide
7. Click the Cable tab and add the extra cable attenuation.
8. To start autotuning, choose Auto-Tune from the Tuning menu.
Auto-Tune window, click Options.
9. In the
Auto-Tune options window, see that the Enable showing of message boxes check box is
10. In the
checked, and click OK.
Results
Autotuning completed successfully! message appears.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Page 7 –17