Olympus STYLUS STYLUS-5010 Instruction Manual page 29

1
Select the ISO setting option in the
shooting function menu.
2
Use HI to select the setting
option, and press the A button to
set.
Option
The camera automatically adjusts
ISO AUTO the sensitivity according to the
shooting scene.
The camera uses a higher
sensitivity compared to
HIGH ISO AUTO [ISO AUTO] to minimize blur
caused by a moving subject or by
camera shake.
The ISO sensitivity is fi xed to the
Value
selected value.
P P
0.0 0.0
WB WB
AUTO AUTO
ISO 200 ISO 200 ISO ISO ISO ISO ISO ISO
100 100 200 200 400 400
1/400 1/400 F3.2 F3.2
Description
Sequential shooting (Drive)
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
SEQUENTIAL SEQUENTIAL
Option
One frame is shot each time the
o
shutter button is pressed.
Take sequential shots using the
j focus, brightness (exposure) and
*1
white balance set in the fi rst frame.
The camera takes sequential shots
c
at a faster speed than in [j].
The camera takes sequential shots
d
at approximately 10 frames/sec
The shooting speed varies depending on the
*1
settings for [IMAGE SIZE/COMPRESSION] (p. 30).
*2
approximately 14 frames/
STYLUS-7040/μ-7040
sec.
approximately 10 frames/
STYLUS-5010/μ-5010
sec.
When set to [j], the fl ash (p.26) cannot
be set to [REDEYE]. In addition, when
set to [c] or [d], the fl ash is fi xed to
[FLASH OFF].
When set to [c] or [d], [IMAGE SIZE]
is limited to [3] or lower, and the ISO
sensitivity is fi xed to [ISO AUTO].
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
Description
.
*2
EN 29