Olympus STYLUS STYLUS-5010 Instruction Manual page 24

Taking pictures with [MANUAL]
1 Use HI to specify at which edge the
next picture is to be connected.
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
1 1
BACK MENU
1st frame
3 Compose the next shot so that joint area
1 overlaps joint area 2.
4 Press the shutter button to take the next
shot.
To combine only two pictures, press the
A button before taking the third frame.
5 Repeat steps 3 and 4 to take a third
frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
24 EN
1 1
BACK MENU
Joint areas
MANUAL MANUAL
2 2 1 1
CANCEL MENU
1 1
CANCEL MENU SAVE
Composition of the 2nd frame
Taking pictures with [PC]
1 Use FGHI to select the direction that
the frames are combined.
2 Press the shutter button to take the fi rst
frame, and then compose the second
MANUAL MANUAL
shot.
Before fi rst
2 2
shot
MANUAL MANUAL
After fi rst
2 2
shot
SAVE OK
●
After the fi rst shot, the area shown in white
MANUAL MANUAL
reappears on the side of the display opposite
the pan direction. Frame subsequent
photographs so that they overlap with the
2 2
image in the monitor.
3 Repeat Step 2 until the number of
desired frames is taken, and then press
OK
the A button or m button when
fi nished.
Panorama shooting is possible for up to
10 frames.
Refer to the PC software (ib) help guide for
details on how to make panorama images.
1 1
BACK
MENU
1 1
EXIT
MENU
PC PC
2 2
PC PC
2 2