Olympus Stylus 850 SW Instruction Manual page 40

VIDEO OUT
NTSC
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal
type.
• TV video signal types differ by country/region. Check the video signal type before connecting
the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Multi-connector
Settings on the camera
Press o in playback mode to turn the
camera on.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the
picture you want to display.
POWER SAVE
OFF
When no operation has been performed for approximately 10 seconds while in shooting mode,
the monitor automatically shuts off. Pressing the zoom button or other buttons restores the
camera from power save mode.
LED ILLUMINATOR
OFF
This function provides additional lighting when a quick light source is needed and to help you
compose your picture in a dark environment.
g "g/E/Y button Changing the information on display/Display the menu guide/
Turning on the LED illuminator/Checking the time" (P. 20)
40
EN
................................................................................Playing back pictures on a TV
/ PAL
Connector cover
................................................... Setting the camera to the power save mode
/ ON
..................................................... Setting the LED illuminator function
/ ON
Connect to the TV's video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Settings on the TV
Turn the TV on, and set it to video input
mode.
• For details of switching to video input,
refer to your TV's instruction manual.
• Images and the information displayed on
the screen may become cropped
depending on the TV's settings.