Olympus Stylus 500 Advanced Manual page 138

Troubleshooting
Playback of recorded images
(
Possible cause
The picture is out of focus.
A subject unsuited to AF
was taken.
The camera moved
when the shutter button
was pressed.
The flash was set to [$]
in a lighting condition
requiring use of the
flash.
The lens was dirty.
The picture is too bright.
The flash was set to [#]. Select other than fill-in flash.
The center of the subject
is too dark.
The [ISO] is at a high
setting.
10
138
Corrective action
Use focus lock to focus on the subject and
then shoot.
Hold the camera correctly and press the
shutter button gently.
Set the flash mode to [AUTO].
Clean the lens. Use a commercially available
blower blush and then wipe with a lens
cleaner to remove dust. Mold may form on
the lens surface if the lens is left dirty.
If the center of the subject is too dark, the
surrounding area emerges as too bright.
Adjust the exposure compensation toward
minus (–).
Set the [ISO] to [AUTO] or to a low sensitivity:
[64]
Ref.
page
P.23
P.22
P.41
P.141
P.41
P.47
P.46