Flash Led - Nokia RM-132 Service Manual & Parts Manual

RM-132; RM-133
System Module
Sensor photo detectors
F number/Aperture
Focal length
Focus range
Still Image resolutions
Still images file format
Video resolutions
Video clip length
Video file format
Exposure
White Balance
Colours

Flash LED

The device back camera has a flash LED (FLED) located directly beside the camera, providing better lighting
conditions in darker environments. The same LED is also used as an indicator light to indicate video clip
recording, and to indicate when pictures are being taken as a privacy indicator.
The connections between the main PWB and the FLED are implemented with a pair of "pogo" pins shown as
X6501 on the schematic.
The FLED has four white LEDs connected in series in one module. The module also includes a lens with its
plastic housing to ensure a proper light pattern at the target.
The dimensions of the FLED are 6.5 x 7.5 x 3.5 mm.
Issue 1
Figure 80 Camera module bottom view including serial numbering
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
3 million
f/3.5
4.7 mm
Normal mode: 68 cm to infinity
2080x1560, 1600x1200, 1280x960, 800x600,
640x480
EXIF (JPEG), *.jpg
352x288, 176x144, 128x96 all 15 frames per second
30 seconds or free, maximal clip length in free mode
is 1 hour
3GPP, *.3gp or MPEG-4, *.mp4 (64 kbps in short
mode and 128 kbps in maximum mode)
Automatic
Automatic or adjustable
16.7 million / 24-bit
Nokia Customer Care
Page 9 –13