Nokia Customer Care
Programming is completed when
The product type designator and MCU SW version are displayed in the status bar.
SW Update window and then choose File→Close Product .
vi Close the
Request file.
2. Create a
For this procedure, you must supply +12 V to CU-4 from an external power supply.
i
To connect the phone with
ii Choose Tools→Certificate Restore .
iii To choose a location for the request file, click Browse.
Page 6 –38
Flashing Completed message is displayed.
Phoenix , choose File→Scan Product .
COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
RM-132; RM-133
Issue 1