Nokia RM-132 Service Manual & Parts Manual page 243

RM-132; RM-133
RF Troubleshooting and Manual Tuning Guide
5. To specify the cable loss from a module jig to the communication tester, choose Set Loss from the
Tuning menu.
Set Loss window, click the Jig tab, and select the right jig for the phone from the drop-down list.
6. In the
Alternatively, you can add a new jig by clicking Add, and selecting the desired jig from the list.
7. Click the Cable tab and add the extra cable attenuation.
8. To start autotuning, choose Auto-Tune from the Tuning menu.
Auto-Tune window, click Options.
9. In the
Auto-Tune options window, ensure the Enable showing of message boxes check box is checked,
10. In the
and click OK.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2006 Nokia. All rights reserved.
Nokia Customer Care
Page 7 –25